Optical Cable Traction Equipment GLQYS — Gasoline-Powered Pulling for Underground Fiber Conduits
The Suntech GLQYS is a gasoline-powered optical cable traction machine built for installing fiber and steel cable through underground conduits. It pulls continuously at 50–60 metres per minute with over 3KN of traction force, so crews can complete long duct runs without manual hauling or cable damage.
Built From Job-Site Experience
This puller was refined alongside telecom installation crews working on FTTH rollouts and long-haul fiber routes. Their input drove three changes: a sealed traction system that needs no fluid top-ups, self-lubricating guide wheels, and a compact 800×600×800mm body that one operator can position at a manhole. The result is a machine that keeps pace with the crew instead of slowing it down.
Engineering You Can Verify
A 3.7KW gasoline engine drives precision traction wheels through a tension-controlled transmission, maintaining steady force even at full load. The automatic tension relief valve protects cable jackets from over-pull, dual safety locks prevent accidental start-up, and the adjustable guide accepts cable diameters from 5mm to 45mm. A 4-litre fuel tank covers a full working day of typical conduit pulls.
Technical Specifications
| Traction Force |
>3KN |
| Traction Speed |
50–60 metres / minute |
| Cable Diameter Range |
5mm–45mm |
| Applicable Cable |
Optical cable / steel wire / power cable |
| Fuel Tank Capacity |
4 litres |
| Total Equipment Power |
3.7KW |
| Machine Size |
800mm × 600mm × 800mm |
| Machine Weight |
56kg |
Testing and Quality Control
Every unit is factory tested under load before it is packed. We check traction force, tension-relief response, guide-wheel alignment and engine idle on each machine, and component history is traceable by serial number. Manufacturing follows ISO 9001 quality procedures, and the GLQYS is built to relevant telecom and machinery standards.
Documentation, Warranty and Support
Machines ship with a multilingual operation and maintenance guide, a cable-grip set and a heavy-duty carrying case. A 12-month warranty covers manufacturing defects, and our technical team advises on conduit routing, cable-grip selection and pull-force settings in English, Spanish and Chinese.
Where It Works Best
- FTTH drop cable and long-haul fiber installation
- Underground conduit and duct pulls
- Aerial fiber and steel wire stringing
- Data center and commercial network cabling
- Utility and renewable-energy site wiring
Choosing the Right Puller
Match the guide setting to your cable diameter and set the tension relief below the jacket’s rated pull. For long duct runs, pair the machine with a cable lubricator and a swivel pulling eye to keep force even. Tell us your cable type, conduit length and diameter, and we will recommend the right configuration.
Frequently Asked Questions
What cable sizes does it handle? Cables from 5mm to 45mm diameter, including optical cable, steel wire and power cable.
How fast can it pull? 50–60 metres per minute with over 3KN of traction force, controlled by the tension-relief valve.
Can one person operate it? Yes. At 56kg in a compact 800×600×800mm frame, it can be positioned and run by a single operator.
Request a Quotation
Send us your cable type, conduit length and diameter. We will reply with a recommended setup, lead time and shipping options. Contact our team for a factory-direct quotation today.
